Windows Stuck on Loading Screen? Fix It With 5 Ways Now!

Windows stuck on loading screen is a common problem reported on Windows 11, 10, and 7. If your Windows gets stuck on the loading screen, that usually means your computer can't move past the startup phase. And the loading screen usually shows the Windows logo with a spinning animation. Usually, it will last minutes to even hours. But if the screen stays frozen and you can't use your computer, it's a boot/startup issue.

Some people might try turning off or restarting their computers to solve it. But this isn't a safe solution for the long run. Sometimes, this problem may indicate potential risks of data loss or system crashes. But don’t worry, let’s fix the Windows stuck on welcome screen problem now.

5 solutions for Windows stuck on loading screen

To solve Windows stuck on loading screen, there are 5 solutions. We will share the reasons for doing that with specific steps.

Solution 1. Check for updates

Checking for updates can address compatibility issues and apply bug fixes. This method can exclude conflicts, thus solving Windows stuck on the welcome screen.

Step 1. Turn off your computer multiple times until you get to the Windows Recovery Environment (winRE).

Step 2. Press and hold the Power button until your device turns off, then use the Power button to turn the computer back on.

Step 3. Repeat the steps mentioned above until you reach the WinRE.

Step 4. Choose Troubleshoot > Advanced Options > Command Prompt. Type: bcdedit /set {default} safeboot network and hit Enter to enter safe mode.

Step 5. Wait for the operating system to completely start in Safe Mode. Then, go to Settings > Windows Update and click on "Check for updates."

Solution 2. Remove peripherals

Peripherals like USB stuff, Bluetooth gadgets, SD card readers, mouse, keyboard, and more can cause compatibility issues or disruptions in the boot sequence. If checking for updates doesn't help, unplug all the things you've connected to your computer. Basically, anything that's not built into your computer.

Once the system successfully boots without the peripherals, you can then gradually reconnect them to identify which one might be causing the problem. This trick is like the easiest and most common fix that lots of people use when their computers stuck on welcome screen.

Solution 3. Run Startup Repair

The startup repair tool is designed to diagnose and resolve system file corruption that might be causing Windows stuck on loading screen. Here's what you need to do:

Step 1. First, get into the Windows Recovery Environment (WinRE) using the methods described earlier. Then, click on Troubleshoot > Advanced options > Startup Repair.

Step 2. Choose an account that has administrator rights and enter your password.

The Windows Startup Repair Tool will now start working. It will carefully examine your system to figure out what's causing your Windows stuck on welcome screen.

Solution 4. Perform system restore

By undoing recent changes or updates that might be causing the issue, restoring the system to a previous functional state can be a practical measure to fix PC stuck on welcome screen.

Step 1. First, press and hold the Power button to forcefully turn off your PC three times. This will bring you to the Windows Recovery Environment. Then, click on "Troubleshoot," followed by "Advanced," and finally select "System Restore."

Step 2. In the new window that appears, click on "Next." You'll need to pick a system restore point, and then click "Next" again. A warning will show up, and you should click "Yes."

Solution 5. Rebuild MBR

MBR is an essential part of the booting process. If MBR (Master Boot Record) gets corrupted or damaged, the system may not be able to locate the necessary instructions to start the OS. Using CMD or creating Windows installation media for MBR repair can be complex and risky, with potential risk for further errors and data loss.

For an easy and safe MBR fix, try AOMEI Partition Assistant Professional. It mends MBR without DVDs/CDs; instead, you can make a bootable USB with it to repair MBR via Windows PE environment by booting from the USB.

Step 1. Install and open the software on another working computer. Plug in an empty USB drive. On the main screen, tap "Tools" and pick "Create Bootable Media." Follow the provided steps to make a bootable USB.

Step 2. Connect the USB (with AOMEI Partition Assistant Pro) to the computer. Turn on the computer. Choose the option for "USB Boot Device" and select the prepared USB drive. Press "Proceed" to create a WinPE bootable disk for your Windows computer.

Step 3. Once you're in the system, the AOMEI Partition Assistant will start. Pick the main hard disk, then choose "Rebuild MBR" from the drop-down menu.

Step 4. Select the right MBR type for your Windows, then click "OK."

Step 5. Hit "Apply" > "Proceed" to rebuild the MBR.

Summary

Windows stuck on loading screen can be fixed in 5 ways. If you find that problems occurs in the MBR, AOMEI Partition Assistant is a safeguard choice. However, in the future, you can still seek help for this multifunctional tool. It boasts many other practical features.

When you need to extend drive space, you can use its functions like Allocate Free Space, APP Mover, PC Cleaner. If you want to fix computer issues, convert system disks to MBR/GPT, recover lost data, or manage boot options can all be your easy choices. For Windows Server users, this software also supports Windows Server Edition.