Sometimes, you might need to convert MBR to GPT Windows 10. Here we will teach you how to convert MBR and GPT using Command Line, Disk Management, MBR2GPT.exe and a professional converter (which can convert disk to MBR or GPT without data loss and without reinstalling Windows in Windows 11, 10, 8, 7).
Prior to learning how to convert MBR and GPT disk in Windows 10, let’s have a basic understanding of what is MBR disk and what is GPT disk.
▶ MBR (short for Master Boot Record) allows for a maximum partition size of 2TBs with 4 primary partitions or 3 primary partitions and 1 extended partition. To create over 4 partitions on an MBR disk, you should create (a maximum of) 3 primary partitions and then 1 extended partition that will allow you to create multiple sub-partitions (logical drives). ▶ GPT (short for GUID Partition Table) theoretically doesn’t have any limits on the partition number and the disk size. GPT system disk can only be booted from a UEFI (United Extensive Firmware Interface) enabled system. Only users, whose computer's motherboard supports UEFI, can take advantage of GPT to create an unlimited amount of partitions and make full use of the larger hard disk. But GPT structure can’t be used on removable media (USB sticks, CDs, DVDs etc.).
Users often ask whether should they use MBR or GPT structure in their Windows 10 PCs. MBR structures can only support disks up to 2TBs in size, which means if you have a drive larger than 2TBs, the surpassing space will show as unallocated that you cannot access and use. Therefore, in order to take full advantage of the big hard disk, you have to convert MBR to GPT in Windows 10. Or if you want to upgrade your Windows 10 PC to Windows 11, you have to select GPT because Windows 11 only boots in UEFI mode.
However, you should note that Windows XP 32-bit, Windows 2003 32-bit, Windows 2000, and Windows NT4 operating systems can’t support GPT disks. When using these systems GPT disks will show "GPT Protective" partitions, and you won’t be able to access the data on the disk until you convert it from GPT to MBR.
As with everything, there are pros and cons to using GPT or MBR partition structures. The majority of today’s users will convert between the structures depending on the present situation and their hardware requirements.
To convert MBR to GPT or GPT to MBR in Windows 11/10/8/7, you can first make use of its native tools: Windows Disk Management and DiskPart.exe.
Windows 10 Disk Management is a built-in tool that allows you to create, delete, format, extend and shrink partitions, and convert disk to GPT/ MBR structures. To use Disk Management, you need to open it by right-clicking on This PC -> Manage -> Disk Management. Next, right-click on the disk you want to convert. In the pop-up menu, you will find the "Convert to GPT disk" or "Convert to MBR disk" option unavailable.
That’s because Disk Managemen is only able to convert between GPT and MBR when there are no partitions on the disk. Therefore, you must first delete all the partitions on the aim disk before conversion. Moreover, the solution only works when you are converting a non-system disk because you cannot delete the system partition within Windows.
DiskPart is another Windows built-in tool. Same as Disk Management, DiskPart only allows you to convert a disk when there are no partitions on the disk. On the other hand, it is more functional than Disk Management, allowing you to convert both system disk and non-system disk to MBR or GPT. Because you can access the DiskPart command-line in WinPE mode and then delete the system drive before conversion.
To convert a data disk with partitions on, take the following steps:
Step 1. Click on the "Start Menu" and input "DiskPart" in the search box and press "Enter". Click "Yes" to open the command prompt. Step 2. Input "list disk" and press "Enter”. Step 3. Input "select disk n" and press "Enter". (Note: n is the number of the disk you want to convert). Step 4. Input "clean" and press "Enter" to delete all the partitions on the selected disk. If there are no partitions, skip this step. Step 5. Input "convert mbr" or “convert gpt” and press ‘Enter’ to complete the conversion between GPT and MBR formats.
Note: To convert system disk between MBR and GPT via DiskPart, you have to boot your computer from Windows installation media. In the Windows Setup screen, press "Shift+F10" to bring out the Command Prompt line, and execute the above methods (choose the system disk) to convert boot hard disk to MBR or GPT.
Another valuable tool for converting from MBR to GPT is Microsoft’s MBR2GPT.exe. It is important to note that this tool is only available in Windows 10 version 1703 and above, including Windows 11. If your operating system falls into this range, MBR2GPT.exe provides a fast and efficient solution to convert from MBR disk to GPT.
Keep in mind that MBR2GPT.exe only runs in WinPE environments and is specifically designed to seamlessly convert operating system disks from MBR to GPT. However, it is important to realize that this tool is not suitable for converting data disks between MBR and GPT. For this situation, alternatives should be sought. Please follow the steps outlined below for a smooth conversion process:
Step 1. Right-click on the Windows icon and select “Search.”
Step 2. Type cmd or command prompt, right-click on Command Prompt from the result, and select “Run as administrator.”
Step 3. Type mbr2gpt /convert /disk:0 /allowfullos and hit Enter. (If your OS disk number is not 0, replace 0 with the correct disk number.)
As you can see, the first two methods allow you to convert an MBR disk to GPT (or vice versa), however, both of them require you to delete all of the disk partitions beforehand. The third method requires a good understanding of command line. Therefore, to avoid data loss, you should back up all important data beforehand. Or you can switch to third-party software to finish the conversion without deleting partitions.
To convert disk between MBR and GPT while keeping inside data safe, we recommend you use AOMEI Partition Assistant Professional Edition. This powerful partition manager can convert both system disk and data disk to GPT or MBR without deleting partitions on the target disk. Moreover, you can directly convert a system disk within Windows (no need to enter the WinPE environment) as long as you can boot into Windows successfully. You can download the demo version to see how to convert MBR to GPT without reinstalling Windows in Windows 10.
Tips: ▸ If you want to convert a system disk between MBR and GPT, you will need to change the boot mode from Legacy to UEFI so that the system can recognize the GPT disk and boot successfully. ▸ If there are more than 4 partitions on your GPT disk, you will not be able to convert to MBR structure unless you reduce the total number to 4 by deleting the additional ones. ▸ To avoid data loss caused by improper human operations, back up everything necessary in advance.
If you plan to convert GPT to MBR, follow the instruction:
Step 1. Install it, and launch the program. In the main window, you should right-click on the disk that you want to convert and choose the "Convert to MBR" option.
Step 2. Click "OK" to continue.
Step 3. Click "Apply" to perform the pending operations.
After that, you have converted to GPT successfully. To convert GPT to MBR, just right-click the GPT disk and select the "Convert to GPT" option and then follow the steps to make it done.
To boot the PC successfully after the system/boot disk has been converted from MBR to GPT, please switch boot mode from Legacy BIOS to UEFI mode. You may need to check your PC (or motherboards) manual in order to find specific instructions on how to change the settings.
If your Windows cannot boot up as normal, or you need to convert MBR to GPT/GPT to MBR during the Windows 10 installation, you can first create a Windows PE bootable Media via AOMEI Partition Assistant on another working computer, then load your computer from the bootable USB and do as above to convert disk between MBR and GPT without operating system.
If you have a hard drive that you want to use but won't boot from, and it's larger than 2 TB, select GPT (GUID Partition Table).
GPT (GUID Partition Table) disks offer several advantages over older MBR (Master Boot Record) disks, such as support for larger disk sizes, more partitions, and improved data integrity.
In fact, one way to convert MBR to GPT without formatting is to use a third-party tool such as AOMEI Partition Assistant Professional.
We recommend installing Windows 10 with UEFI enabled and using GUID Partition Table (GPT). If you select a master boot record (MBR) style partition table, some features may be inaccessible.
With four different methods shared, now you should know how to convert MBR to GPT in Windows 10/8/7. Obviously, AOMEI Partition Assistant Professional offers the securest way to convert a disk between MBR and GPT without deleting partitions so that you can get around the risk of losing data.
Besides, it comes with many other great functions like merging partitions, allocating free space from one partition to another, cloning MBR disk to GPT, or cloning GPT disk to MBR disk, and migrating OS to an SSD (or any other hard disk). To enjoy those amazing features on Windows Server, please try AOMEI Partition Assistant Server.