Learn to perform Samsung Data Migration to only move OS and introduce a handy tool to move Windows system in a simpler way.
Samsung Data Migration (SDM) is a data migration tool that comes with Samsung SSDs like Samsung 850 EVO. It helps users migrate operating system and data from the existing storage devices to the new Samsung SSD without reinstalling.
Here comes the brief guide to cloning C drive only to Samsung SSD. Connect or install the Samsung SSD and make sure it can be detected by Samsung Data Migration. If not, you may want to turn to Samsung SSD not detected in Windows 10 for more tips.
Step 1. Install and launch Samsung Data Migration. Click Start in the lower-right corner to continue.
Step 2. You’ll see the source disk, i.e. the existing disk which contains the operating system and the Samsung SSD. Pitch on C drive only. You’ll see only C drive on the Samsung SSD in virtual states. Click Start again to continue.
Step 3. A warning dialogue will pop out saying all data on the new Samsung SSD will be lost. Confirm the disk and click Yes to start the process. Wait for the process completes.
Step 4. When you see “The data on the Source Disk has been successfully cloned to your Samsung SSD” in green font, the process completes perfectly. Shut down the PC and boot from the cloned Samsung SSD.
▶ Tips: Do not disconnect any of the disks during the cloning process. Make sure the power supply is sufficient for cloning.
It is quite simple and fast to perform Samsung Data Migration with a boot drive. In most cases, the process will complete as expected. However, some users report that the cloning failed. It reports the target disk has been disconnected and which is not true. In a few cases, you’ll get Samsung Data Migration stuck at 99 percent, 0 percent, or 100 percent. All in all, finding a reliable workaround is necessary if you happen to face one of those troubles.
AOMEI Partition Assistant Professional is handy OS migration software that allows you to migrate only OS drive to Samsung SSD. It will automatically align the partition for SSD during the system migration when it detects an SSD. The system drive and system-related drives are selected by default which avoids the boot failure caused by incomplete cloning. Supports Windows 11, 10, 8, 7, XP, and Vista.
Step 1. Connect or install the Samsung SSD. Install and launch AOMEI Partition Assistant.
Step 2. Click “Clone” in the top toolbar, and choose “Migrate OS”.
Step 3. As covered, the source system drive(s) is selected by default. Select the unallocated space on the Samsung SSD to store OS. If there is no unallocated space, selected partitions will be deleted after you check the option beneath.
Step 4. Resize the system drive on Samsung SSD if you want to.
Step 5. Take a mental note of this information.
Step 6. View the virtual result. Click Apply and then Proceed to start the migration.
Step 7. Shut down your PC after completion. You can either change the boot order in BIOS or replace an old hard drive with cloned SSD for the test.
It is not uncommon to do Samsung Data Migration with OS only to Samsung SSDs. The SDM provides a simple solution for its users. However, preparing a plan B is not a bad choice if that does not work.
AOMEI Partition Assistant also can assist you to change partition size flexibly and without formatting or deleting data. For instance, you can extend a partition to a non-contiguous space without data loss. And there's the Server Edition for you to manage Server devices conveniently.