Windows 10 Boot Stuck on Preparing Automatic Repair? Fix It Now!

Windows 10 Boot Stuck on Preparing Automatic Repair?

Automatic Repair is an integrated Windows feature designed to automatically resolve issues that prevent the operating system from functioning properly. It is a great tool to restore the system when something severe happens to it without manual intervention.

However, it is not completely reliable to fix various boot issues using Automatic Repair. Sometimes, your computer might be trapped in the “Preparing Automatic Repair” interface and fail to boot normally.

This page presents four effective repair solutions to eliminate the issue that Windows 10 boot gets stuck on “Preparing Automatic Repair” loop. If you are unsure how to fix the Automatic Repair loop, keep reading this page to find the answer you need.

Effective Methods to Fix Automatic Repair Loop

Although Automatic Repair attempts to fix the system when experiencing issues during startup, it might fail to resolve them and trigger a continuous cycle due to critical errors or corrupted files. Fortunately, you can use appropriate solutions to resolve this loop. When you encounter Windows preparing Automatic Repair, follow these methods below to fix it up.

Method 1. Rebuild BCD

Boot configuration data is a crucial component in Windows to store information necessary for the boot process. Loss or corruption of BCD can hinder the system’s ability to start and run. However, you can rebuild boot configuration data files by using the Bootrec.exe tool. Here are detailed steps to fix Automatic Repair loop via rebuilding BCD:

Step 1. Create a bootable USB first and then connect it to your computer.

Step 2. Turn on your computer and press the BIOS key (like DEL or F2) to enter the BIOS settings. Ensure your computer boots from the connected recovery drive.

Step 3. Customize Windows setup and select Repair your computer on the next interface.

Step 4. After selecting the operating system that you want to repair, click Troubleshoot > Advanced options > Common Prompt.

Step 5. Type the following commands and press the Enter key to detect and fix boot issues.

bootrec /fixmbr

bootrec /fixbootbootrec /scanos

bootrec /rebuildbcd

Step 6. Finally, exit CMD and restart your computer to check whether it has been repaired.

Method 2. Run CHKDSK & SFC

In addition to Bootrec.exe, you can also repair boot issues by running Check Disk and System File Checker. These tools can detect and resolve problems related to disks and system files, respectively. When Windows 10 boot is stuck on preparing Automatic Repair, consider using CHKDSK and SFC to restore it.

Step 1. Select Common Prompt in Advanced options.

Step 2. Type the following commands and press the Enter key to detect and fix boot issues.

chkdsk /f /r /x C: 

sfc /scannow

Step 3. Type exit to close Command Prompt and restart the computer.

Method 3. Disable Automatic Repair

Although enabling Automatic Repair can help you troubleshoot boot issues, itself can also be the reason why your computer can't boot properly. When Windows 10 boot is stuck on “Preparing Automatic Repair”, consider fixing it by disabling the Automatic Repair tool.

Step 1. Select Common Prompt in Advanced options.

Step 2. Type bcdedit /set {default} recoveryenabled no and press the Enter key to disable Automatic Repair. If the command fails to execute, try to type: bcdedit /set {current} recoveryenabled no and press Enter.

Step 3. Type exit to close Command Prompt and restart the computer.

Method 4. Fix Automatic Repair Loop Using Software

Windows 10 boot gets stuck on “Preparing Automatic Repair” loop, using advanced software is an effective solution to fix the repair loop. AOMEI Partition Assistant, a professional partition expert, is designed to help you easily manage and maintain hard disk partitions on your computers.

The Boot Repair tool featured in AOMEI Partition Assistant not only detects and repairs boot issues for local PCs, but also restores non-booting system by creating a bootable disk with just a few clicks.

★Why choose AOMEI Partition Assistant:

Provides advanced technology and comprehensive repair options tailored to specific problems.

Supports resolving common issues related disks across most Windows versions.

Features user-friendly interfaces to guide users through a smooth repair process.

Provides access to extensive tutorials and customer support, assisting users during the repair process.

Here’s how to fix Windows 10 preparing Automatic Repair using AOMEI Partition Assistant:

Step 1. Install AOMEI Partition Assistant on a working PC and connect a USB drive (at least 16 GB of free space) to it.

Step 2. Open the software to click Boot Repair below the Recover section.

Step 3. Click the create a bootable disk option to create a WinPE Boot Repair drive for recovery.

Step 4. Connect the created drive to the faulty computer and enter the BIOS/UEFI setup to set the USB drive as the primary boot device. Then your computer will boot and automatically load the Boot Repair tool to detect all boot issues.

Step 5. Select the repairable boot entries you want to repair and click the Repair button.

Step 6. Once the process completes, remove the bootable disk and start the computer from the original system drive.

Why does Windows get stuck on Automatic Repair Loop?

When the system repeatedly fails to boot and continuously tries to fix the issue without success, Windows will get stuck on Automatic Repair loop. This terrible issue can arise from various reasons. Here are common reasons for Automatic Loop, including:

► Loss or corruption of the Boot Configuration Data can prevent Windows from booting correctly.

► When important system files become corrupted, the system may crash during startup.

► Errors on your hard drivers can also lead to boot issues, preventing your PC from loading the OS normally.

► If your computer is configured to boot from the wrong device, it may get stuck in a repair loop.

► Sudden power outages may also lead to corruption on system files, making it difficult to boot up your PC.

Conclusion

While Automatic Repair is a great tool designed to fix various startup problems, it may sometimes fail and trap the system in a loop. Windows 10 boot getting stuck on “Preparing Automatic Repair” loop can be a frustrating experience.

This guide outlines several effective methods to fix the Automatic Repair loop, including rebuilding the Boot Configuration Data, running CHKDSK and SFC commands, disabling Automatic Repair, and utilizing third-party software like AOMEI Partition Assistant. By following these steps, you can successfully overcome the Automatic Repair loop and get your PC back to normal functionality.