For your data safety, Windows 10 requires you to enter a password when logging in. But can Windows 10 login without password? Of course yes! Read on and learn how to login to Windows 10 without password in different ways.
"Shortly after I got my new Lenovo laptop, I was trying to eliminate the need to enter my password to log in. What I wanted was to go straight to the desktop on boot but I didn't succeed at that. Can you help me complete the Windows 10 login without password?"
When you first install Windows 10, you will be asked to set a password for your computer. And every time when you boot your PC or laptop, you need to enter this password to access your system.
Obviously, those who don't know the computer password are unable to log in to your device, which is an effective way to protect your data from unauthorized access. That's why Windows 10 requires you to create a password that only you know and most users are willing to make it.
Although login password is of avail in some respects, it becomes annoying sometimes especially when you just need to wake up your device from standby mode but you are still asked to type the password, which will slow down your startup speed.
What's worse, what if you’ve forgotten or lost your password? You will fail to access your device and you will lose control of it. If you log in to your device with a Microsoft account, you can easily reset password on the Microsoft website. But if you are using a local account, it’s much more complicated to change a new password.
That's why so many Windows 10 users are eager to login without password Windows 10. By doing so, they can get a faster startup and don’t worry about the potential problems caused by a forgotten password.
If you know the password and can access your computer normally, you can try the following methods to bypass your login password.
Typing the password letter by letter is sometimes time-consuming. The first solution is to use other sign-in options like Windows Hello Face, Windows Hello Fingerprint, PIN, Security Key, etc, which is much easier than using the traditional password.
All the options can be changed in Windows Settings and here is how to do it:
Step 1. Click the "Start" button and then click "Settings" to open the Windows Settings.
Step 2. In the new window, click "Sign-in options", and then click "Change" to change the logon method to another one.
To bypass Windows 10 login without password, you can disable the welcome screen in Local Group Policy Editor so that you can realize the automatic login.
Step 1. Press "Win + R" to open Run box and type "gpedit.msc" to open Local Group Policy Editor.
Step 2. Go to Computer Configuration > Administrative Templates > System > Logon in the left column. And double click "Don't display the Getting Started welcome screen at logon" on the right list.
Step 3. In the new window, check "Enabled" to bypass Getting Started welcome screen at logon. Then, you can have Windows 10 login without password.
The same as disabling the welcome screen, enabling automatic login is also a useful way to skip the login password in Windows 10. Here are the detailed steps.
Step 1. Press the "Win + R" keys to open the Run dialog box, type in "netplwiz" and click "OK".
Step 2. In the new window, uncheck the box "user a must enter a user name and password to use this computer" and click "OK" to save changes.
Step 3. To make sure your computer won't be intruded, you need to enter your account name and password and then click "OK".
Step 4. After that, restart your Windows 10 PC to see if you can automatically log in.
Apart from the previous three methods, you can also directly remove the login password to access your PC automatically. To delete a password, here are three options. Let’s walk you through them one by one.
Step 1. Press the "Windows + I" keys at the same time to open Windows Settings and then click "Accounts".
Step 2. Choose the "Sign-in option" from the left panel and click the "Change" button under the "Password" section.
Step 3. Type in the existing password and click the "Next" button.
Step 4. Then keep the password field blank and press "Next". Your current password will be removed.
Step 1. Search "Command Prompt" on the search bar and run Command Prompt as administrator.
Step 2. Type the command "net user" to list all the user accounts on your computer. Take note of the account name you are using as login account.
Step 3. Then type the command "net user username *". Use your actual username to replace the example one. After that, you can check whether you can login without password Windows 10.
Step 1. Press "Windows + R", type "lusrmgr.msc" in the box, and click "OK".
Step 2. Click "Users" in the left pane, then right-click the target account and select "Set Password" from the list.
Step 3. Click the "Proceed" button to confirm the note.
Step 4. Now, leave the field bland and then hit "OK".
As you can see, if you can remember your password, there are many ways you can have a try and all the methods can be done with ease. However, if have forgotten the login password, things become more complicated.
But don't fret, three tested and trusted methods have been introduced in this part. You can refer to the relevant step-by-step tutorial based on your need.
According to Microsoft official, you can use a Windows password reset disk to remove a forgotten password. As long as you have created such a reset USB before you forgot the password, you can follow the steps below to realize the password removal.
Step 1. Insert the prepared password reset USB into your Windows 10 computer and click the "Reset password" link on the sign-screen.
Step 2. Click "Next" button in the pop-up window and select the target password reset disk. Click "Next" to move on.
Step 3. To remove password, remember to type nothing on the new blank and click "Next" button.
Step 4. Click "Finish" to complete the task. Then, you can log in the Windows 10 computer without any password.
You may think about what you should do if you don't create such a tool beforehand. Here comes the solution: You are able to create a password reset USB via a third-party Windows unlock tool like AOMEI Partition Assistant Professional.
It is a wonderful program that can satisfy your need of password removal or reset after you have forgotten the password. This is because AOMEI software can be run on different versions of Windows 11/10/8/7/XP/Vista and you can make the password reset USB on another PC for your target Windows 10 computer.
You can first download the demo version and follow the steps below to have a free trial:
Step 1. Prepare an empty USB and connect it to another Windows computer that works normally. Install and launch AOMEI Partition Assistant Professional. And click "Tools" > "Reset Windows Password" in the main interface.
Step 2. In the pop-up window, click "Next" to begin to create a WinPE bootable media.
Step 3. Here we tick "USB Boot Device" and choose your prepared USB and click "Proceed" to move on.
Step 4. Note that the USB flash drive will be formatted during the process. Click "OK" to continue.
Step 5. When the bootable USB is created successfully, insert it into the target computer and change the boot order to boot your Windows 10 from the USB.
Step 6. When the PC starts, you will see the interface of AOMEI Partition Assistant pop out automatically. Click "Reset Windows Password", select the Windows system you would like to operate, and click "Next".
Step 7. Then, select the account you would like to operate and choose the feature you want to use: "Remove Account Password" or "Reset Account Password". Here we choose "Remove Account Password" and click "Next".
Step 8. You will be asked to make sure you really want to remove the password. Click "Yes" to confirm your decision. After that, you can log in to the Windows 10 without the password.
In addition to creating a password reset USB, you can also make a Windows installation disk to reinstall the system. It will remove everything on your computer, and so will the password.
But what you should know is that the process will certainly cause data loss and you need to wait patiently for this procedure to end. Let’s see how to bypass Windows 10 login without password via the Windows installation disk.
Step 1. Create a Windows installation disk, connect it to your Win 10 PC, and boot from it.
Step 2. Set some parameters based on your needs and click "Install Now" on the Windows Setup screen.
Step 2. Then, enter your product key. If you don't have one, just click "I don't have a product key" to skip it.
Step 3. Select the operating system you want to install and hit "Next".
Step 4. In the new window, select "Custom: Install Windows only(advanced)".
Step 5. Then, choose a partition to install your Windows and hit "Next".
Step 6. After that, you will seem to get a new brand computer without password set before. So, you can log in to the system automatically.
When you get tired of having to enter a password every time you boot the computer or you have forgotten the Windows 10 password and be locked out of the system, you may wonder if you can make Windows 10 login without password.
On this page, we have introduced you different ways to bypass the Windows 10 login password. All of them are safe and reliable. Just choose the one that is most suitable for you.