Why does the error message "No bootable image found notebook will be shutdown" occur? Some Windows users report this error and are unable to use PCs. In this post, you’ll learn how to fix this problem.
If you encounter the "No Bootable Image Found, Notebook Will Be Shutdown" error message on your notebook, it typically indicates a problem with the system's boot process. This error can be frustrating, but understanding its causes and implementing the right solutions can help you resolve it efficiently.
Encountering the "No Bootable Image Found, Notebook Will Be Shutdown" error on your notebook can stem from various underlying issues.
Normally, it may arise due to a corrupted boot configuration. This corruption often occurs as a result of improper shutdown procedures, software conflicts, or even malicious software. When the system attempts to boot, it fails to locate the necessary instructions to initiate the process, prompting the error message.
Additionally, missing or corrupted system files can contribute to this problem. These essential files are pivotal for the booting sequence, and if they're damaged or absent, the system cannot proceed with the startup process, leading to the error.
Another potential cause of this error is disk health. If the storage device containing the operating system is faulty or failing, the system won't be able to access the necessary data to boot successfully. Physical damage, logical errors, or deteriorating components within the hard drive also hinder its functionality, triggering the "No Bootable Image Found" error.
Moreover, misconfigured boot order settings in the BIOS or UEFI firmware can exacerbate the issue. If the system is attempting to boot from a non-bootable device or an incorrect sequence of devices, it will fail to find a bootable image, resulting in the error message.
If something goes wrong while changing the BIOS, your system may become stuck, resulting in critical data loss. To minimize disk damage and unexpected loss, it is strongly advised that you inspect the disk first and restore all vital data to an external hard drive before using alternative ways.
Because of the complex algorithms used, using AOMEI Partition Assistant Professional to correct the problem is a smart option. This utility specializes in resolving a variety of boot-related difficulties, such as boot errors, blue screens, and black screens.
You may use it to manufacture bootable media and perform extensive repairs that target the fundamental causes of boot issues even when your machine is unable to boot.
The Best Windows Disk Partition Manager and PC Optimizer
Part 1. Create bootable media to boot your PC
Step 1. Connect the USB drive to a working Windows computer, install and run AOMEI Partition Assistant Professional. Click “Make Bootable Media” and hit on “Next” to proceed.
Step 2. Choose the right USB drive under “USB Boot Device” and click “Proceed”.
Step 3. Then you will be told the USB will be formatted, please back up important data. If you have done that, click “Yes”.
Step 4. Then wait for the process to be completed.
Note: the bootable USB drive contains the pre-installed AOMEI Partition Assistant Professional.
Part 2. Perform check partition/surface test
When the process is done, insert the bootable USB drive into the computer with boot issues. Here, we need to check our disk. You can choose Check Partition function or Surface Test to scan your disk.
▶ Check Partition
Right-click the drive you wish to inspect and select Advanced > inspect Partition. The pop-out window has three options: check the error only, check and correct the problem, and detect faulty sectors. Choose the one that best fits you.
▶ Surface Test
Right-click the disk you want to scan and select Test > Disk Surface Test.
AOMEI FastRecovery is capable of recovering data from a variety of media, including HDD, SSD, and SD card, and it is compatible with over 200 formats. To recover lost data from a failed PC, you must first generate a bootable media on a functioning PC using this tool.
Step 1. Install and run this tool on a well-working PC. Click the "Crashed PC Recovery" button to create WinPE bootable media according to your needs and click "Create".
You can boot the boot failure computer into BIOS configuration, then set USB as the priority boot option under boot sequence.
Step 1. After you enter AOMEI FastRecovery. Choose the exact partition or disk where your data lost and click Scan.
Step 2. Then, the recovery tool start to scan and search. lt will execute the “Quickly Scan" first for finding your deleted data fast, and then execute the “Deep Scan" for searching other lost data.
Step 3. Once the scan is completed, all deleted files, recycle bins and other missing files will be displayed. Please select the file you would like to recover and then click "Recover".
Step 4. Then, select a folder path to save your recovered files.
Step 5. Wait patiently for this process of recovering ends.
The BIOS setup is responsible for loading the root drive and running the operating system makeon your computer. If you have any boot-related problems, check the BIOS settings and make the necessary modifications in the Boot options. The exact approach for resolving this problem is: "No bootable image found." "The notebook will be shut down."
Step 1: Restart your computer and immediately hit the BIOS key to enter the BIOS settings. If you don't know what your computer's right BIOS key is, look it out online using the model number.
Step 2: Select the "System Setup" option and deactivate "Secure Boot."
Step 3: Navigate to "Boot Maintenance Manager," then go to "Advanced Boot Options."
Step 4: Choose "Boot Mode," then hit the "Legacy" option from the list.
If altering the Boot configuration does not work, you must reset the BIOS settings to the defaults. Sometimes simply changing your BIOS settings to default works, especially if you've been getting the "no bootable image found notebook will be shut down" issue. Let's try starting your notepad.
Step 1: Access the BIOS/UEFI settings described in the previous procedure.
Step 2: Navigate to the "Load setup defaults" option to get more choices.
Step 3: Click the "ESC" button and choose "Apply Changes."
Step 4: Exit the BIOS screen. Your system will restart automatically.
If the problem persists, reinstalling the hard disk may be required to diagnose hardware issues. For example, the "no bootable image found notebook will be shut down" error might be caused by an incorrectly mounted hard disk.
Before you begin the reinstallation procedure, keep in mind that the specific steps may differ depending on the type of your device.
Step 1: Unplug all cords and turn the system off.
Step 2: Turn the laptop upside down and remove the lid.
Step 3: Remove the battery and hold the power button to discharge all electric charges.
Step 4: Gently remove the drive and reattach it. Make that the drive is securely connected into the drive socket.
Step 5: Insert the battery, screw the base panel, and turn on your system.
If reinstalling your operating system and modifying disk settings did not address the "no bootable image found, notebook will be shut down" problem, your system disk is most likely damaged. Here's how you can handle it.
First, remove the disk using the methods specified in Way 4. Next, connect it to another computer. If the disk still does not operate on another machine, it indicates that it is damaged. Consider replacing it with a fresh one to see if the problem is fixed.
If the drive works externally, remember to clone its contents to a new disk using the “Clone Disk” of AOMEI Partition Assistant, especially if you want to keep your data secure. It will clone all partitions, files, and others.
Step 1. Launch AOMEI Partition Assistant and click Clone -> Clone Disk.
Step 2. Choose a clone method in this window. Generally, we recommend the Clone Disk Quickly and click Next.
Tips: ✎ Clone Disk Quickly allows you to adjust the size of partition on the destination disk and supports cloning larger disk to smaller one. ✎ Sector-by-Sector Clone allows you to clone all sectors on source disk to destination disk.
Step 3. Choose the old disk as the source disk in this step and click Next.
Step 4. And choose new disk as the destination disk. If the destination disk is SSD, you can check “Optimize the performance of SSD” and click Next.
Step 5. In the Edit Disk window, you can resize the partition to fit the new disk and click Next.
Step 6. Finally, click Apply and Proceed to submit the operations.
Step 7. Restart the PC, enter the BIOS and change the boot order to boot the computer from the cloned disk.
Many people get the annoying "No Bootable Image Found" error on their notebook. In this post, we covered five easy solutions to this problem. Each solution is intended to provide a clear route to resolving the "No Bootable Image Found" error and getting your machine back online.