To replace HDD with SSD on desktop or laptop without reinstalling Windows 11, 10, 8, 7, you can use AOMEI Partition Assistant to clone HDD to SSD.
Are you fed up with the low boot speed of your computer? Are you tired of the long wait of loading the game? If you want to change this dilemma, it is highly recommended to replace the original HDD with an SSD on your desktop or laptop. After changing from HDD to SSD, you can make use of SSD’s advantages listed below:
► Lower power consumption: There is no motor on SSD; therefore the power consumption of Solid-state Drive is less than Hard Disk Drive. ► Faster data access: Without the seek to process, SSD can read data faster than HDD. When your desktop or laptop HDD is replaced with an SSD, it is with higher speed when booting up the operating system or running installed applications. ► Without moving parts: SSD has no moving parts (Except some SSDs are attached with cooling fans). Therefore, SSD makes no noise and is not easy to be affected by some accidents such as falling or colliding with other objects.
In consideration of all benefits of SSD, it is a fairly wise decision to switch HDD to SSD on your desktop. However, what should you do to keep all data on the original hard drive while replacing HDD with SSD? It’s time-consuming and energy-wasting to reinstall the Windows system and re-configure all settings. It’s not simple to make an image of an OS drive and restore it on SSD via Windows snap-in tool as well. At this point, you can apply third-party disk cloning software to clone HDD to SSD on desktop.
Among various utilities that can copy content on HDD to SSD, AOMEI Partition Assistant Professional definitely will be the first option for enjoying two different copy methods, allowing you to clone hard drive to smaller SSD or clone hard drive with BitLocker encrypted. Apart from cloning an entire hard drive to SSD, it can clone OS-related partitions only or copy certain specific partitions like Recovery partition to SSD. What’s more, it is capable of allowing you to align SSD partitions to improve the performance of SSD and do SSD Secure Erase to recover the lost speed of SSD.
To replace the hard drive without reinstalling Windows and all other applications, make preparations at first:
✐ Select a proper SSD: The selected SSD should be suitable for your desktop and the size of it shall be not smaller than the used space of HDD. If SSD is not big enough to hold all data on an old disk, consider the cloning OS partition. ✐ Prepare your computer: Turn off your computer and install SSD on your desktop and make sure that it can be detected by the operating system. ✐ Prepare your HDD: Defrag HDD and delete unnecessary files on the HDD to decrease the time of the cloning process(omissible).
Then, follow the listed steps to clone HDD to SSD in Windows 11/10/8/7.
Step 1. Install and launch AOMEI Partition Assistant, click "Clone" in the main interface and select "Clone Disk".
Step 2. Choose the hard disk that you need to clone as the source disk and click "Next".
Step 3. Select the destination disk to store the data on the source disk, and then click "Next".
Step 4. Then, you can check the source and destination disk in the next window or change to “Sector to Sector clone”, and click the "Confirm" button to continue if there is no problem.
Here, you can also click the "Settings" button to adjust the partition size on the destination disk or tick "4k alignment" to improve the reading and writing speed of SSD if the target disk is an SSD drive.
Step 5. At last, click "Apply" and "Proceed" in the main interface to start cloning the hard drive.
✍ Notices: ✐Do not format your old HDD before booting from cloned SSD successfully. ✐ It is also allowed to clone MBR to GTP disk or GPT to MBR through AOMEI Partition Assistant Professional. ✐ AOMEI Partition Assistant Professional is for Windows PCs; for Windows Servers, use its Server edition.
After transferring all data from HDD to SSD on the desktop through cloning via AOMEI Partition Assistant Professional, you can replace HDD without reinstalling Windows and applications. You can abandon HDD or keep it to store data. If you decide to retain your original HDD, you need to enter BIOS to change the boot order to boot from cloned SSD in a success.
It’s rather simple to replace HDD with SSD on the desktop in Windows 11/10/8/7 as long as you pick up right SSD and employ an appropriate HDD to SSD cloning software. After equipped with SSD, your desktop definitely owns performance better than before. And you are able to take some measures to optimize SSD, thus you can keep SSD at its sharp shape.