If you cannot format USB showing 0 bytes in Windows 10, 8, 7, you can refer to the solutions on this page. Then you can easily tackle with the "USB 0 bytes cannot format" issue.
Hi, experts! Whenever I tried to open my USB flash drive on Windows computer, I will receive a prompt message saying “You need to format it before you can use it”. But when I attempt to format the drive, it returns the warning: There is no disk in drive X. Insert a disk. So the USB 0 bytes cannot be formatted. What can I do to fix it? Any solution will be greatly appreciated.
Many Windows users have suffered from 0 bytes errors, such as USB flash drives showing 0 bytes in free/used space capacity, SD memory card 0 bytes free/used space, or external hard drives 0 bytes, etc. Why does this happen? In general, any of the following factors would trigger USB showing 0 bytes.
1. USB flash drive is corrupted due to virus intrusion, or the MBR gets damaged. 2. The formatting process failed for some reason. 3. There are some bad sectors on the flash drive. 4. There is some physical problem on the USB flash drive, such as circuits or boards fails to work. 5. Abrupt power failure, while the disk is writing data, would damage the file system. 6. Unplug the USB drive without ejecting or safely removing it.
When the USB flash drive or other device shows 0 bytes in used and free space, formatting it directly is considered as a guaranteed fix. However, from the first section (Scenario), we can easily know that the formatting 0 bytes USB does not always go smoothly. And some common error messages might pop out and prevent you from formatting the drive successfully like “There is no disk in drive X. Insert a disk, and then try again”, “Windows was unable to complete the format” and more.
When Windows File Explorer or Disk Management tool fails to format USB drive that shows 0 bytes, you can turn to DiskPart.exe tool or a third-party formatting utility.
Note: because formatting will delete all data on the USB drive, try to recover important data from it if necessary. Recoverit Pro can be a perfect choice for that.
First of all, launch Diskpart tool: press "Win+R" on your keyboard, input cmd in the Run dialogue and hit on "Enter" to open Command Prompt window. And input "diskpart" and press Enter. Then in the window, type the following commands in sequence and press Enter after each one.
•list disk
•select disk #
•clean
•create partition primary
•format fs=ntfs quick
At last, wait for the process to be finished. When you see “DiskPart successfully formatted the volume”, you can execute “exit” command to leave this window.
If you are not familiar with running complex commands, or it does not resolve “USB 0 bytes cannot format” issue, either, you can try 3rd party software to fulfill the formatting task. Here we highly recommend AOMEI Partition Assistant Standard. This freeware could forcefully format write-protected disk, corrupted hard drives. So, it is worth a shot. Below are steps of how to format 0 bytes USB flash drive in Windows 10.
Step 1. Download, install, and run the freeware. Right-click the USB drive and select "Format Partition".
Step 2. Choose your desired file system (ex: NTFS), and click "OK".
Step 3. Back to the main interface, click "Apply" to start formatting the disk.
Well, formatting is not the only way to repair USB drive/SD card/memory card that show 0 bytes in capacity. If you don’t want to take a risk of data loss when repairing 0 byte disks, try the following methods.
Enter into Device Manager by selecting the "Start" button, typing "Device Manager", and select it from the list of results.
Expand the category with the hardware you want to update, then right-click it to select "Properties". Go to "Driver" tab, and select "Update Driver".
Or select Uninstall to uninstalled USB, then removed it from your computer and plugged back after a while.
If there are some bad sectors in your USB drive, it will probably show 0 bytes. So it is necessary to check bad sectors and repair them.
Open Windows File Explorer, right click the partition of USB drive and get Properties window, then click "Tool" >"Check now". Then tick both options in the pop-out window and click on "Start".
If the MBR of USB flash drive is damaged, you can rebuild MBR via AOMEI Partition Assistant.
All in all, when you meet “USB 0 bytes cannot format” problem on Windows 10/8/7, both Diskpart and AOMEI Partition Assistant are worth trying. On the whole, AOMEI Partition Assistant provides an easier and more effective method.
Moreover, you can upgrade to the Professional version to enjoy more advanced features, like recovering lost partitions, converting system disk between MBR and GPT without deleting any partitions/losing data for Windows 11 upgrade, extending NTFS system partition without reboot and more in Windows 10/8/7.