Try a handy SanDisk clone softwareIf to clone your current Windows hard drive to a SanDisk SSD and make it bootable.
Firstly, we need to know that HDD (Hard Disk Drive) and SSD (Solid State Drives) are of different mechanical structures, for example, an HDD reads and writes data on its rotating platter with a mechanical arm moving around, while an SSD works with a chip.
Secondly, from the different mechanical structures between HDDs and SSDs, we know that SSD has more advantages compared with HDD: ✦ Speed An SSD reads and writes data up to 10 times quicker than an HDD. SSD-equipped PC boots quicker, starts and runs software faster, and transfers files faster. Whether you're using your computer for leisure, school, or work. And SSD won't have fragments, but an HDD disk needs to defragment regularly to keep the performance. ✦ Reliability Because HDDs have moving elements that make them subject to crashes and damage from vibration, it is more likely to keep your data secure if you drop your laptop bag or your system shakes while it is functioning. ✦ Noise, Power, and Weight SSDs are completely silent since they are mechanically inert. The SSD consumes no energy that is lost as friction or noise, making it more efficient. SSDs are available in 2.5-inch sizes, however, this is merely for ease in fitting into existing drive bays. M.2 SSDs are available in 42mm, 60mm, 80mm, and 120mm lengths.
SanDisk SSD is well-known and popular among customers, and upgrading your old hard drive to a SanDisk SSD is a good idea. To do so, you need a SanDisk SSD clone software to clone all contents of your HDD to the SanDisk SSD to avoid the annoyance of re-installing the operating system and applications, even the pain of losing any data.
To clone HDD to SanDisk SSD, we’d like to recommend you AOMEI Partition Assistant Standard for achieving the job. It's a free disk/partition manager for Windows users. "Clone Disk Wizard" can help you do a quick and safe clone from the source disk to the destination disk.
Before starting doing so, please make sure your SanDisk SSD is connected.
Step 1. Install and launch AOMEI Partition Assistant Standard. Click "Clone" in the main interface, and select "Clone Disk".
Step 2. Choose the original disk as the source disk and click "Next".
Step 3. Select the SanDisk SSD drive as the destination disk, and then click "Next".
Step 4. Then, you can check the source and destination disk in the next window or change to "Sector to Sector clone", and click the "Confirm" button to continue if there is no problem.
Here, you can also click the "Settings" button to adjust the partition size on the destination disk or tick "4k alignment" to improve the reading and writing speed of the SSD.
Step 5. After returning to the main interface, check the pending operation and click "Apply" and "Proceed" to commit the operation.
AOMEI Partition Assistant Standard is a powerful cloning software for SanDisk SSD, which supports all Windows editions including Windows 7/8/8.1/10/11 of both 32bit and 64bit. Also, you can use it to make bootable media, convert between NTFS and FAT32, and so on. If you want to clone system disk from MBR to GPT or GPT to MBR, please employ AOMEI Partition Assistant Professional.