Learn to format hard drive from Command Prompt, thus you can still format hard drive successfully when it is not recognized and present as RAW in Windows 7, 8, 10, or 11.
Case 1: “To back up some files on my local disk, I connected an external USB hard drive to my computer. I was prompted to format it before using it. But when I tried to format it within File Explorer, I received an error message – Windows was unable to complete the format.
Case 2: My hard drive Windows installed is full, thus I want to format it and reinstall the operating system & applications. But when I format hard drive system partition in Disk Management, I found that the option of “Format…” grayed out.
When the external hard drive becomes raw, it is possible that the file system of it is damaged. At this point, you can try to format disk from Command Prompt. It is not recommended to use “format f: /fs: ntfs” command to format hard drive, there are chances that it will fail. Follow the steps given below:
Note: Formatting will erase all data on the external hard drive. It is suggested to back up data to cloud or local disk.
In the Search box, input “command prompt”, right-click Command Prompt among listed results and choose “Run as administrator”.
In Command Prompt window, input “diskpart” and hit Enter key. Then, type the following commands in order and hit Enter after each one.
βͺ list disk βͺ select disk m, “m” refers to the number of your disk that will be formatted βͺ clean βͺ create partition primary βͺ format fs=ntfs quick, where “ntfs” can be replaced with fat32 or exfat according to your own demand.
After successfully format the hard drive to a wanted file system, input exit, and hit Enter to close Command Prompt window. Then, assign a drive letter in Disk Management to it and you are able to access and open it from File Explorer to back up your files on the local disk.
PS.: You can follow the steps above to format SD card or USB flash drive from Command Prompt in Windows 7/8/8.1/10/11.
If you use “format c: /fs:ntfs” to format hard drive Windows installed on from Command Prompt in Windows, you’ll receive see the message that Format cannot run because the volume is in use by another process when you format the volume that holds the operating system.
Here you can format hard drive partition that contains operating system from Command Prompt in BIOS with Windows Setup CD/DVD. Let’s have a closer look.
1. Insert Windows installation media into the computer and boot from it.
2. Waiting for “Windows is loading files…” and “Starting Windows” screens to finish.
3. Determine “Language to install”, “Time and currency format” and “Keyboard or input method”; then, click “Next”.
3. In the first Windows installation screen, click “Repair your computer”. Then, select the operating system and click “Next” button.
4. In the Troubleshoot window, choose "Advanced options" and then choose“Command Prompt”.
5. In Command Prompt window, type “format c: /fs:ntfs” and hit “Enter”.
It is acceptable to format raw external drive from Command Prompt in Windows or format internal hard drive system partition from Command Prompt in BIOS. But for some users who are unfamiliar with computer knowledge, it is not so easy to operate. At this point, AOMEI Partition Assistant Standard is highly recommended due to its powerful functions and easy operating. Let’s see how it works.
Format raw external drive including external hard drive, USB flash drive and SD card
Step 1. Install and run AOMEI Partition Assistant. Right-click the external hard drive partition and choose “Format Partition”.
Step 2. In the following small window, choose one among listed file systems and click “OK”. You can also change cluster size or add partition label.
Step 3. Confirm the operation and click “Apply” and “Proceed” to execute it.
Format the partition holding operating system on the internal hard drive
Step 1. Connect a USB drive to your computer and run AOMEI Partition Assistant. In the main interface, click “Make Bootable Media” and follow the next prompts to create a bootable media.
Step 2. Reboot computer and enter BIOS to boot your computer from the bootable USB drive created via AOMEI Partition Assistant.
Step 3. Wait for the main interface of AOMEI Partition Assistant to appear. Right-click internal hard drive system partition and choose “Format Partition”. And the following steps are as same as formatting the partition on the external hard drive.
From all the above, you can realize how to format hard drive from Command Prompt in Windows or form BIOS. You can choose a proper way to format hard drive partition based on the specific situation. If you are a green hand in computer, you can turn to AOMEI Partition Assistant Standard to format external or internal hard drive simply and successfully. And you can make use of partassist.exe utility if you upgrade AOMEI Partition Assistant to Professional.
