To copy exFAT partition from one disk to another, you can employ AOMEI Partition Assistant.
ExFAT is a file system that was introduced in 2006. It is more compatible than the NTFS file system and has a file capacity and partition space advantage over FAT32. To be more specific, NTFS is entirely supported on Windows but read-only on Mac, while exFAT is also supported; FAT32 only supports up to 4GB file size and 8TB partition capacity, but exFAT can bypass these constraints.
Overall, the exFAT partition is a good option if you need to operate with Windows and Mac and store files greater than 4GB.
In general, you may want to copy the exFAT partition under the two following situations:
Situation 1. Need to format exFAT partition to FAT32 or other file systems. In order to avoid data loss, you can clone exFAT partition to another hard drive as formatting operation will erase all data on the partition.
Situation 2. When compared to FAT32 and NTFS, the exFAT file system is more easily corrupted. At this point, in case the exFAT partition is damaged, it is necessary to copy the exFAT formatted partition to an external hard drive or other storage devices to protect your data.
To migrate data or to protect data, no matter in which situation, it is a sensible decision to perform a partition copy.
To complete this task securely and simply, you can apply this professional and reliable partition copy software, AOMEI Partition Assistant Standard, which can assist you in managing disks and partitions conveniently in Windows 11/10/8/7, XP, and Vista. It can not only copy exFAT partition but also copy NTFS or FAT32 partition.
Three important things you should know before copying partition: ① The destination place should be an unallocated space. If there is no unallocated space on your destination disk, you can delete unused partitions or shrink partition to get unallocated space. ② If there are already four primary partitions and unallocated space on an MBR disk, the unallocated space can’t be used as the destination place. If there are already three primary partitions and unallocated space, the unallocated space will be created as a logical partition. ③The size of the unallocated space should be larger than the size of the exFAT partition as the “Sector-by-Sector Clone” method will be applied during cloning the exFAT partition.
Detailed steps on how to clone exFAT partition to another drive.
Step 1. Install and launch AOMEI Partition Assistant, right-click the partition you want to clone and select the "Clone Partition" tool to run partition clone. (You can also click the "Clone" main tab and select "Clone Partition".)
Step 2. In next window, select the destination partition or unallocated space to hold your source partition, and then click "Confirm".
Step 3. Then, you will enter the Confirm interface where you can check the source and destination clone location. After all is set, you can click the "Confirm" button to continue.
Notes:
Step 4. In the next window, you can click the "Settings" button to adjust the target partition size. As you can see from the screenshot, you could adjust the size of source partition in order to fit the target partition as per your need, or directly skip the step and click "Save".
Step 5. You can preview the partition copy operating by viewing the "Pending Operations". To commit the "Pending Operations", please click "Apply" and "Proceed".
The cloning process will start and you can check the cloning process. Once the process is completed successfully, you will get a congratulation window. Finally, you can check the partition layout on the destination disk will be identical to the source partition.
Notes: ☞ AOMEI Partition Assistant Standard can also help you to copy recovery partitions from one hard drive to another as well. ☞ It is available to create a new partition on the unallocated space via AOMEI Partition Assistant Standard after you cloning exFAT partition to a larger unallocated space.
Without a doubt, AOMEI Partition Assistant is excellent partition copy software. It is simple to use and has a user-friendly interface. It allows you to successfully clone an exFAT partition to another disk in only 5 steps. Apart from partition cloning, AOMEI Partition Assistant Standard provides a slew of other useful functions.
For example, it enables you to clone a whole hard drive to another, saving you the effort of reinstalling Windows and numerous apps when replacing an original hard drive with an SSD. PA Standard only enables MBR data disk cloning. If you wish to clone an MBR system disk or a GPT system disk to an MBR/GPT system disk, please use AOMEI Partition Assistant Professional.