There are chances that you need to boot Windows 7 from external hard drive. This article demonstrates how to create bootable media and boot Windows 7 from the drive.
“I have a Dell desktop and the operating system installed on my computer is Windows 7. I want to format all the partitions on the original hard drive. But when I started to format C drive, the option of “Format Partition” was grayed out. I was told that it was not allowed to format C drive within Windows and I need to format the system drive from somewhere rather than the Windows installation.
I know I can make a bootable Windows PE bootable media and then boot Windows 7 from the external hard drive to manage disk. I just wonder what should I do to make bootable external hard drive and then boot Windows 7 from it? Any suggestion shall be appreciated! Thank you!”
As mentioned in the “Scenario”, it is wise to make bootable media to format C drive. At this point, you can turn to third-party software like AOMEI Partition Assistant Professional. This powerful software can help you to create bootable media within a few clicks. What’s more, it is featured with many functions base on disk and partition management as well. It is possible to extend C drive without data loss and shrink C drive beyond half via AOMEI Partition Assistant Professional.
Something that you should know before the operation:
βͺ It is available to create bootable media via AOMEI Partition Assistant whether your device is CD/DVD or USB drive. βͺ When your operating system is Windows XP, please download Windows AIK to configure and deploy OS to new hardware. βͺ As all the data on the external hard drive will be formatted during the process, it is recommended to backup your important data on the external hard drive.
Detailed steps to create bootable external hard drive
Then, download the demo version and do the following steps (Take creating bootable USB for Windows 7 as an example).
Step 1. Connect the USB drive to your computer and make sure it can be detected by your PC. Install and run AOMEI Partition Assistant. Click “Tools” in the top toolbar, and choose “Make Bootable Media” and click “Next”.
Step 2. In the pop-up window, select one way to create bootable media (Here choose “USB Boot Device”). Then, click “Proceed”.
Step 3. You’ll be noticed that all the data on the USB drive will be formatted. Click “Yes” and wait for the finish of the process.
After creating a bootable external hard drive or making Windows TO Go USB Drive, you can take the steps below to boot Windows 7 from the external hard drive (Take USB drive as an example):
Step 1. Reboot the computer and press a certain key (Normally, it is “F2” or “Delete”; if not, you can refer to the PC’s manual or website to find out the right key) to enter BIOS.
Step 2. Then, select USB Device and hit “Enter” to boot from USB flash drive.
Then you will enter WinPE environment and you can run AOMEI Partition Assistant to format C drive or something else.
Generally, after creating bootable media and adjusting boot order, you can boot Windows 7 from external hard drive successfully. But it is possible that you are unable to boot Windows from the USB drive or other external hard drive. If you are trapped in it, you can do as follows to solve the problem.
First of all, you should enter BIOS to check the boot order. The problem that the external hard drive won’t boot is mainly caused by inappropriate BIOS configuration. If the BIOS configuration is OK, you can remove other USB devices and try to boot from the external hard drive again. If it still won’t boot, you should consider whether there is a problem with file system of your external hard drive.
When you try to boot Windows in UEFI mode, you should make sure that the file system of the bootable USB drive is FAT32. If your USB drive is NTFS file system, you can convert it to FAT32 without data loss using AOMEI Partition Assistant. Then you can boot your Windows from USB drive successfully.