Acronis Clone Disk Failed: Why and How to Fix That?
What to do if the Acronis clone disk failed? This passage will explain the causes with troubleshoot suggestions. You can also try to use an Acronis alternative to easily clone your disks.
Scenario: Acronis clone disk failed, see log for details
Hey. I bought a couple of Crucial BX300 (120gb) SSD's to upgrade a couple of computers at home to make it run faster for my Windows 10 laptop. But I get the following error when I use Acronis to clone the hard drive:
"Disk cloning has failed. See log for details."
I found the tool which lets me view the log files. I made two attempts to clone and both log files say the same thing. Please see the attachment. The hard drive in the laptop is 1tb but has less than 100gb used space. Can anyone tell me why can’t I clone with Acronis?
Many thanks,
- Question from Acronis Forum
Acronis True Image is widely regarded as top-notch cloning software today, preferred by many for disk cloning tasks. While it's generally efficient with minimal failures, there are times when it might falter, leading to error messages. Some common errors include:
- Common errors of Acronis clone disk failed:
- Clone Disk Operation Failed
- Failed to run the task
- Error 0x13c0005: Operation has completed with errors
- Failed to execute the task script. 0x10002 Error #1364
- A specified authentication package is unknown 0xFFF0
- Error 0x00640067+0x0009FFFF
- Clone failed to read sector/data from the disk
Why do the Acronis failed to clone disk?
These error messages often mean that your disk is corrupted, damaged, or other problems, which will easily cause issues like Acronis clone failed to read sector/data from the disk. Another common problem is when cloning hard drives from computer brands like Dell or HP. They often have locked partitions, especially the recovery partition, which can cause failures during the cloning process. At this time, people should usually create these recovery partitions to solve problems such as the operating system being damaged and unable to boot or the screen turning blue or black.
The third issue is that when you move from a large hard drive to a smaller solid-state drive (SSD), Acronis may not resize the recovery partition, finally leading to clone disk failed. However, you can still clone between drives of different sizes as long as if you choose a qualified tool.
To fix that, the Acronis official also provides suggestions like:
What is the best Acronis alternative?
What to do if you can't fix Acronis error Clone disk operation failed even following the suggested methods? It is time to try other hard drive cloning software. AOMEI Partition Assistant Professional must can be the best Acronis alternative. Why? Because it allows you to:
Benefits of using AOMEI Partition Assistant to clone disk ✍ 1. Clone a larger hard drive to a smaller disk by cloning only the available sectors of the hard drive to the new hard drive. ✍ 2. Clone the hard drive even including bad sectors that may lead to clone failed. For example, like Macrium Reflect clone failed error 9. And ensure it can boot successfully. ✍ 3. Allow disk partition resizing before cloning starts. ✍ 4. Automatically ensure SSD 4K alignment during the cloning process. ✍ 5. You can clone from SSD to SSD/HDD or from HDD to HDD/SSD.
Step 1. Open the installed AOMEI Partition Assistant Professional, click "Clone" in the main interface, and select "Clone Disk".
Step 2. Choose the hard disk that you need to clone as the source disk like SSD and click "Next".
Step 3. Select the destination disk to store the data on the source disk, and then click "Next".
Step 4. Then, you can check the source and destination disk in the next window or change to "Sector to Sector clone", and click the "Confirm" button to continue if there is no problem.
Here, you can also click the "Settings" button to adjust the partition size on the destination disk or tick "4k alignment" to Optimize the performance of SSD if the target disk is an SSD drive.
Tip: If you want to clone Windows to a smaller drive, the "Clone without resizing partitions" button will be greyed out. Then, a Note about how to boot OS from the destination disk will pop up. Read and keep it in mind.
Step 5. After returning to the main interface, check the pending operation and click "Apply" and "Proceed" to commit the operation.
When the process is over, you can use the new hard drive to replace the old hard drive. If you keep both drives on your computer, you probably need to enter BIOS Settings to change boot drive.
◇ The follow the guide to set the new drive as the first boot drive
Step 1. Restart the computer, when you see the first screen, press the functional key (F2, F3, F4, F5, ESC) to enter "BIOS Setup". Or run AOMEI Partition Assistant to click "Tools" > "UEFI BIOS Boot Options Manager" in turn to directly enter BIOS.
Step 2. Select "Change boot order", and change the cloned hard drive to the top of the listed drives.
Step 3. Press “F10” to save and leave.
✍ Note: 1. If the cloned hard drive won't boot, you can check if the boot mode (BIOS and UEFI) and the connection boot are correct. 2. If it is a new SSD, please set the partition style (MBR or GPT) to the same as the old disk when you initialize the SSD. If you need to make a conversion, AOMEI Partition Assistant can help you convert between MBR/GPT without data loss.
Conclusion
If you encounter Acronis clone disk failed and cannot solve the problem, it is better to try the best Acronis alternative, AOMEI Partition Assistant. This software offers another function called Migrate OS, which is usually used to transfer the OS only.
Besides these, it supports extending drive space, recovering lost data, making bootable media, and so on. There is also the Server edition prepared for all Windows Server users.